How to insert a corner unit with an upstand in just one side only

How to insert a corner unit with an upstand in just one side only

In order to insert a “L-shape” corner that only has an upstand on one side, follow these steps:

1. From the “Furnishing -> Add unit” option [1], insert the “Corner Base L-shape Unit” [2], but first click on the “Mouldings” button [3] and deactivate the “Upstand” option [4]:

2. Next, to simulate the upstand on one side, we will use a “Panel”. Click on “Add accessory” [5], select “Legs… -> Flat panel” [6], and click the “Measurements” button [7] to change the panel’s dimensions, as well as its “Elevation” (*the measurements in this example are fictional; you should use measurements that fit your design). Once inserted into the design, use the “Move” tool [8] to adjust it perfectly into position:

3. Finally, change the material and put the same as the one on the countertop. To do so, right click on the “Panel”, select the option “Accessory materials” [9], and select the new material [10]: