< Back to index
Published06/07/2024
Updated06/07/2024
ByMicrocad Software

How to make a wall with different backsplashes

In the following example, we will see how to create a wall with multiple coverings. To do this, within the “Photo” tab [1], you should select the “Wall Materials” option [2], and in the material selection window, click on the button [3]:

Below is the next window, where we will add the different materials that will form the coverings of the wall or walls:

Click on the “+” button to add the first material. The following window will appear, where you should select the material and the “Height” that this material will occupy on the wall starting from the floor. In our example, we select this tile and give it a height of 100cm:
Accept this window to add the material to the coverings.

We repeat the same process to add the other 2 materials:

  • Material “Tile C21” with a height of 50cm:


  • Material “Tile K006“, with a height of 100cm, and an angle of 45°:

Finally, if the “Apply to All” option is checked, this covering will be applied to all walls, and if this option is not checked, you will need to select the wall where you want to apply it. In our example, we will apply the material to all walls. Accept this window:

Table of contents