How to “simulate” an L-shaped closet, a closet with 2 fronts, or a corner closet in Quick3DPlan

How to “simulate” an L-shaped closet, a closet with 2 fronts, or a corner closet in Quick3DPlan

In order to “simulate” an “L-shape closet” (or a closet with 2 fronts or a corner closet) using the “Closet add-on module for Quick3DPlan”, please follow these steps (NOTE: This is an example with random measures. You may want to adjust the measures to your needs.):

1. In the “Add closet” window, select the option below in the “Left moulding” section:

2. Select the option below in the “Right moulding” section:

3. Click on the “Project variables” button:

4. Here you can select the closet variables, change the value “B’: Distance between the door system and the right wall” to 65cm (NOTE: This is going to be the other closet width):

5. Insert the first closet that forms the L-shape:

6. Click on “Add closet” and select the same moulding that the first closet had in the “Left moulding” section.
   
   
7. Insert the second closet momentarily at any point.
   
   
8. Rotate the second closet 90º using the “Rotate closet” button [1], select the second closet [2], insert 90 in field “A=” [3] and click on the “Rotate to the right” button [4]. Close the window:

9. Once rotated, click on the second closet to drag and drop it right next to the first closet to form the L shape (or use the “Move” button) as you can see in the screenshot below:

10. Here you can see what it looks like:

11. NOTE: HOW TO MODIFY CLOSET MEASURES.
    To modify the measures of a closet, click on the ruler in the “Structure” section and you will be able to see a window where you can modify the closet “Width”, “Height” and “Depth”: